slip ratio

基本解釋

It was shown that the temperature rise can be of great value under normal working conditions and higher slip ratio.
結果表明，在正常接觸工況和較大滑滾比條件下，輪軌接觸溫升可達到可觀數值。
Finally choose reduce wheel speed, acceleration and slip ratio control parameters of logic threshold for control methods, as the paper design of the ABS controller control methods.
最后選擇以車輪減速度、加速度及滑移率為控制參數的邏輯門限預測控制方法作為本論文設計ABS控制器的控制方法。
Through the generalized steady state tire model and the theoretical equation of slip ratio, a non-linear non-steady state side slip tire model is proposed based on a quasi-steady state concept.
在穩態指數統一模型的基礎上，根據動態過程有效滑移率的微分表達，建立輪胎非穩態側偏特性非線性仿真模型。

滑移率
滑轉率
In the tire slip ratio control layer, the PI control method is utilized, with which the optimized tire slip ratio is guaranteed by controlling the motor driving torque.
在滑轉率控制層中,采用了基于PI控制的滑轉率控制器,通過對驅動電機轉矩的控制將車輪的滑轉率控制在最優滑轉率附近。
滑流比

滑轉率
Analysis of the principle of anti-skid control of the track reveals the relationship of the slip ratio and adhesion coefficient. Combined with the robot model, an anti-skid control system is established to control the slip ratio of the robot.
接下來本文在分析了履帶防滑控制原理的基礎上,揭示了滑轉率與附著條件的關系,然后綜合深海作業機器人模型建立了以滑轉率控制為目標的防滑控制系統。
滑移率
滑脫比