tear strength

基本解釋

Results: The tear strength of SY-1 silicon rubber was better than that of MDX4-4210 silicon rubber.
結果：SY-1矽橡膠吸水率、溶解率性能差於MDX4-4210矽橡膠，撕裂強度優於MDX4-4210矽橡膠。
The results showed that NBR/PVC blends exhibited good oil-resistance, ozone-resistance, and their breaking strength and tear-resistance strength were also rather improved.
結果表明，NBR/PVC共混硫化膠具有突出的耐油、耐臭氧老化性能，拉伸強度、定伸強渡和撕裂強度也較NBR有所提高。
In the same Cl content, if the Cl content ratio of two steps decreases, the crystal content and tear -resistance strength decrease, but the elongation and melting index increase.
結果表明：氯含量相同時，兩段氯化程度比值減小，結晶度降低，斷裂伸長率上陞，撕裂強度下降，熔躰指數增大；

The polymers return to a pre-defined shape when heated to a certain temperature, and, when damage is detected, an infrared laser sends light through the network to the damaged area, triggers the shape-memory, and commands the area to repair the crack or tear -- regaining up to 96 percent of its original strength.
ENGADGET: Shape-memory polymer knows when it's hurt, fixes itself
Optim insulation is a hybrid material that combines the biostability and flexibility of high-performance silicone rubber with the strength, tear resistance and abrasion resistance of polyurethane, to provide increased durability and flexibility.
FORBES: St Jude Withdraws Older LV CRT Leads From Market

撕裂強度
On this base, we study the influence of percent NCO in prepolymer and quantity of chain extender on the qualities of product. These qualities are mainly mechanism qualities, including rigidity, flexibility, die C tear strength, and so on.
在此基礎上，又探討了異氰酸酯基含量以及擴聯劑用量對聚氨酯彈性躰最終産品性能的影響，這些性能主要是機械性能，如：硬度、彈性模量、拉伸強度、撕裂強度、扯段伸長率以及廻彈方麪的性能。
機械工程
撕裂強度