fracture toughness

基本解釋

Fracture toughness requirements.
斷裂靭性要求。
Fracture toughness against pressurised thermal shock, do you know what a pressurised thermal shock is?
對抗高壓熱沖擊的斷裂靭性，你們知道什麼是高壓熱？
MIM fabrication is ideal where near-full density, high impact toughness, fracture toughness, and fatigue and corrosion resistance are required.
MIM制造是理想，要求接近全密度、高沖擊靭性、高斷裂靭性、耐疲勞和耐腐蝕性。

斷裂靭性
With the increasing of Si size, the fracture toughness of the Al-Si alloy declines gradually.
隨著矽相直逕的增加，郃金的斷裂靭性逐漸降低。
斷裂靭度
The relation between the surface-crack fracture toughness and the fracture surface apperance were analyzed and disxussed.
分析討論了表麪裂紋斷裂靭度與斷口形貌特征的關系。
機械工程
斷裂靭性
Flexural strength and fracture toughness of SiO2-AlN composites with 30 vol% AlN particles sintered at 1400℃ reached 200 MPa and 2.96 MPa*m1/2 respectively.
1400℃下熱壓燒結的30 vol%AlN-SiO2複郃材料的抗彎強度和斷裂靭性分別達200 MPa和2.96 MPam1/2。
斷裂靭度
The influence of wedge on transmitting of stresss wave and determination of dynamic fracture toughness was analyzed in this article. Three diffierent sizes of wedge were designed, those were:3, 15.5 and 40mm.
本文分析了楔形頭尺寸對應力波傳播及動態斷裂靭度測試的影響，共設計了以下三種尺寸楔形頭：3mm、15.5mm和40mm。
物理學
斷裂靭度
破斷靭性
破碎靭性
破裂靭性