yield load

基本解釋

With the thickness of tensile anchor plate changing, the range of plastic zone and the magnitude of yield load are investigated;
研究了錨拉板厚度的改變對塑性區(qū)的范圍及初始屈服荷載的影響；
The general yield load, stress and strain rate ahead of notches of I specimens with larger plastic constraint is larger than that of V specimens with small plastic constraint.
塑性拘束較大的直缺口試樣（I）的整體屈服載荷及缺口前的應力、應變和應變率比塑性拘束較小的V缺口試樣（V）大。
Because the limit yield load and crack drive force are important input parameters of defects assessment procedures, plenty of researches were focused on the cracked specimens with strength mismatch.
出于各種結構缺陷評定規(guī)范的需要，很多研究主要針對裂紋試樣，研究力學性能失配對極限屈服載荷和裂紋驅動力的影響。

Given a 60 percent load capacity on average (again, to avoid hot spots), our example would yield an average of 13 physical servers per rack (assume 42u racks) and 520 physical servers.
FORBES: The Case for the Infinite Data Center

屈服荷載
Thus the action that CFRP enhance cracking load and yield load of the beams strengthened with CFRP isn't apparent and the improvement to the performance in bending in the regular service course is limited.
因此,它對提高被加固構件的開裂荷載及屈服荷載作用不是十分明顯,對受彎構件在正常使用階段的性能的改善也有限。
屈服載荷