wall thickness

基本解釋

Don't go much below 45 degrees or you will not leave enough wall thickness .
不要去遠低于45攝氏度，否則您將不會留下足夠的壁厚。
"The trick is to fabricate a lattice of interconnected hollow tubes with a wall thickness 1, 000 times thinner than a human hair", said lead author Dr Tobias Schaedler.
項目領導托比亞斯·斯卡德勒博士說：“這些中空管的管壁厚度不足人類發絲的千分之一，而這項技術的核心技巧就是把中空管相互連接在一起構成格子?！?/li>
To produce specialty tubing, this procedure uses a drawbench to pull tubing through a die and over a mandrel, allowing excellent control of the inside diameter and wall thickness.
為了制造出更精密的管子，這一程序通過拔管機使管子經過鋼型和心軸的拉制，這樣管子的內徑和壁厚精密度就能控制的很好。

They also did ultrasound and other tests to measure blood vessel function and the thickness of the artery wall.

壁厚
It shows that pipe bending by using induction heating applied a counter torque can efficiently reduce the thinning ratio of pipe wall thickness.
計算結果表明：在轉臂上施加一定的反向彎矩，能有效減小彎管的壁厚減薄率。
機械工程
壁厚
Low temperature leads to the formation of multiwalled carbon nanotubes (MWCNTs) with wall thickness of 2-7 nm.
低溫導致壁厚為2nm～7nm的多壁碳納米管(MWCNTs)的生成。
幾何厚度

壁面厚度
The material properties, stump shape, bone orientationand load were same. Through finite element analysis, the influence of wall thickness to the stress distribution within the models was gained.
在以上模型的基礎上，加大壁面厚度建立了三個不同壁面厚度的一體化小腿假肢的三維有限元模型，這些模型的材料屬性、軟組織形狀、骨的定位和載荷都與以上模型相同，通過有限元計算分析壁面厚度對模型應力分布的影響。
土木建筑工程
壁厚