vertical displacement

基本解釋

Moreover, overlapping of up and lower side for area is intended by setting vertical displacement with different level mutually.
此外，和下邊的區域重疊的目的是通過設置不同層次相互垂直位移。
This paper presents the consideration of establishing the bench marks, working bench marks, marks nets properly for the survey control net of vertical displacement in observation design.
本文介紹了在設計時，為設立完整而合理的垂直位移測控系統，對基準點、工作基點、標志和測控網布設的考慮。
For realizing the stability in vertical displacement, the power amplifier must be fast in response for feeding active control coils.
為了實現垂直位移方向上的穩定，給主動控制線圈供電的功率放大器，其響應速度必須具有快速性。

豎向位移
As to direct splice type of embankment widening, considering the three foundation treatment methods under old and new embankments respectively, using elastic model, the horizontal and vertical displacement fields of the foundation are calculated and analyzed in this thesis.
本文在直接式拼接的路堤拓寬型式中,根據新、老路堤下地基處理的不同方式分成三種情況,采用彈性模型分別計算分析了地基的水平位移場和豎向位移場。
變形
The distribution curve of the vertical displacements and the load are straight-line. In the same load, the vertical displacement of the convex surface bearing is the maximum, the planar bearing takes the second, the concave surface bearing is the minimum.
計算結果還表明,三種軸承的垂向位移都隨著載荷的增大而增大,基本都呈線性分布;在相同載荷下,凸面型軸承垂向位移最大,平面型次之,凹面型最小;隨著載荷的增大,平面型軸承下底板的變形形狀與凹面型軸承下底板形狀相似。
土木建筑工程
豎向位移
The calculation formulae for vertical displacement and prestressed force variation of cable truss and cable nets are deduced in theory.
推導了索桁架結構和鞍形索網結構火災下豎向位移和預應力變化的計算公式。
垂直位移