tremie

基本解釋

The assembling of the tremie should ensure the tight connecting of thread.
導管安裝時絲扣要擰緊，底部離孔底20-40厘米。
The assembling of tremie should be firm, possessing smooth inner wall and straight shape without local concave-convex.
導管制作要堅固、內壁光滑、順直、無局部凹凸。
Before the using of tremie it should be tested for water tight, with the water pressure of at least 1.5 times in the hole.
導管在使用前，進行水密試驗，水壓不小于孔內水深壓力的1.;5倍，不合格的不得使用。
Finally，the concrete is placed around the reinforced by tremie and the “slurry”is displaced as the concrete rises to fill the trench.
通過導管在鋼筋籠周圍澆筑混凝上，混凝上不斷上升，“泥漿”排出。
The tremie is connected with special bayonet fittings, with the inner diameter of 25cm and segment length of 3m except for the bottom segment 6m.
導管采用專用的卡口式導管，導管內徑25cm，分節長3m，最下節長6m。