torque

常見例句

• The error torques include mass unbalances, compliances, bias torque, etc.
  誤差力矩包括質量不平衡, 柔性, 偏置力短, 等等.
• The pendulum - torque type of erector is extensively employed on gyro verticals.
  陀螺垂直器上廣泛地采用由擺和力矩馬達組成的修正裝置.
• The torque of the couple is intimately associated with a couple.
  力偶矩與力偶密切相關.
• Carlson etc. Analysis of Torque Ripple due to Phase Commutation in Brushless dc Machines.
  張琛.直流無刷電動機原理及應用.北京:機械工業出版社,1996.
• The three major forces involved in valve actuation are thrust, torque and rimpull.
  決定閥門操作的力主要有三種:推力, 扭矩和邊緣拉力.
• Speed control of direct torque controlled ( DTC ) induction motor drives depends on effectively establishing the stator flux.
  直接轉 矩控制 的感應電動機的速度控制需要有效地建立定子磁通.
• In this case, one wheel may spin freely while the other wheel produces torque.
  在這樣的情況下, 一個輪子打轉,另一個則產生扭矩.
• A new torque identification strategy of valve electric actuator is proposed.
  提出一種新型閥門電動裝置力矩辨識方法.
• The harmonic electromagnetic torque of 5 phase hybrid stepping motors during oscillatory operation is investigated.
  研究了五相混合式步進電動機在振蕩狀態下的諧波電磁轉矩.
• If torque controlled impact wrenches are used how is the applied torque set and monitored?
  如果要使用由轉矩控制的裝嵌扳手,所用的轉矩如何安裝和監測?
• Care MUST be taken not torque lead knee when bringing body around.
  當在附近帶來身體的時候,照料一定被帶不到轉力矩領引膝.
• Precise torque repeatability with accurate installations time after time.
  可反復準確安裝數次,精確的扭矩值具備一定的可重復性.
• One application of CPLD in the measurement system of motor's torque and speed in this thesis.
  文中介紹了當前飛速發展的可編程邏輯器件在電機轉矩轉速測試儀中的一種應用.
• In such cases, the lowest output torque should be used in matching valve requirements.
  在這種情況下, 最小輸出扭矩應該用來滿足閥門的扭矩要求.
• The control of torque and speed variableinduction motor drive can achieve by control of rotor MEMF.
  轉矩和速度控制可以通過控制轉子運動電動勢來實現.
• Direct torque control ( DTC ) is a high performance control method after vector control.
  直接轉矩控制 ( DTC ) 是繼矢量控制后的一種高性能控制方法.
• Under the main production plant adjustable torque wrenches, the United States patented technologies, Chinese manufacturers.
  下屬工廠主要生產可調式扭力扳手, 美國專利技術, 中國制造.
• The flywheel mounts to the engine's crankshaft and transmits engine torque to the clutch assembly.
  飛輪安裝在發動機曲軸上,它將發動機的扭矩傳遞給離合器總成.
• Valve running torque can be calculated utilizing the above formula substituting running thrust for seating thrust.
  利用上列公式,用閥座推力替代運行推力,就可以計算出閥門的運行扭矩.
• The paper describes how to calculate the torque of concentrated brushlessmotor by using the energy method.
  通過實例計算,本文還比較了整數槽繞組和分?jǐn)?shù)槽繞組產生諧波轉矩的情況,采用分?jǐn)?shù)槽繞組可以削弱諧波脈動轉矩.
• The hand must withstand torque of up to 30 Ncm.
  指針須承受30牛頓厘米以上的轉動扭力.
• The causes of excessive high oil temperature in practical work process of torque converter of loader.
  分析了裝載機液力變矩器在實際工作過程中油溫過高的種種原因.
• Motor start torque performance is indicated by the motor's Locked Rotor Torque ( LRT ) figure.
  電機起動扭矩性能是由電機的鎖定轉子扭矩 ( LRT ) 圖表示的.
• Testers work both clockwise and counterclockwise, so you can easily measure torque while tightening and loosening pieces.
  扭力測試儀可順時針或逆時針測量扭力, 因此可方便地測量扭緊和扭松時的扭力.
• OEM products include Torque Sensors, Reinforcement of Computer, Standard chassis, automated production line and other products.
  代工產品包括扭矩傳感器 、 加固計算機 、 標準機箱機柜 、 自動化生產流水線等產品.
• Precision manufacturing techniques ensure uniformity in the torque pattern of the locking element.
  精密的制造技術確保鎖緊元件扭轉方式的一致性.
• Knowledge and experience is preferred acquisition for physical test including strain, torque, force, pressure, temperature etc.
  希望具備物理量測量的知識和經驗,如應變 、 扭矩 、 力 、 壓力 、 溫度等.
• Torque reading is simpale and accurate because torque is displayed on a clear digital display.
  在峰值保持功能時能顯示測得的最大值并保持顯示.
• External torques arise from outside the system.
  外轉矩是由系統外部生產的.
• The cage is connected by a spindle to the torque spring and pointer.
  用銷子將其骨架結構與轉矩彈簧和指針連接.
• The total internal torque in any system is equal to zero.
  任何一個系統,其總內轉矩等于零.
• Speed control of direct torque controlled ( DTC ) induction motor drives depends on effectively establishing the stator flux.
  直接轉 矩控制 的感應電動機的速度控制需要有效地建立定子磁通.
• As synchronous motors, they are able to combine high torques with low speeds.
  作為同步電機, 他們能輸出低速大轉矩.
• The harmonic electromagnetic torque of 5 phase hybrid stepping motors during oscillatory operation is investigated.
  研究了五相混合式步進電動機在振蕩狀態下的諧波電磁轉矩.
• If torque controlled impact wrenches are used how is the applied torque set and monitored?
  如果要使用由轉矩控制的裝嵌扳手,所用的轉矩如何安裝和監測?
• One application of CPLD in the measurement system of motor's torque and speed in this thesis.
  文中介紹了當前飛速發展的可編程邏輯器件在電機轉矩轉速測試儀中的一種應用.
• The control of torque and speed variableinduction motor drive can achieve by control of rotor MEMF.
  轉矩和速度控制可以通過控制轉子運動電動勢來實現.
• Direct torque control ( DTC ) is a high performance control method after vector control.
  直接轉矩控制 ( DTC ) 是繼矢量控制后的一種高性能控制方法.
• Stiffness, ultimate and yield forces ( torques ) were compared using an analysis of variance.
  利用方差分析分析比較剛度 、 臨界和屈服應力 ( 轉矩 ).
• The paper describes how to calculate the torque of concentrated brushlessmotor by using the energy method.
  通過實例計算,本文還比較了整數槽繞組和分?jǐn)?shù)槽繞組產生諧波轉矩的情況,采用分?jǐn)?shù)槽繞組可以削弱諧波脈動轉矩.
• Torque arm. To reduce wear on packing rings , to enable better sealing and to reduce torque.
  轉矩臂. 有利于減少密封環上的磨損, 改善密封性能,減少扭矩.
• Torque estimation of asynchronous motor by measuring voltages and current of the motor.
  轉矩估計的異步電動機通過測量電壓和電流的電機.
• The inner loop adopts sliding mode control which can decouple torque and flux.
  內環采用滑動?？刂茖?shí)現了電動機轉矩和磁通的解耦.
• This paper presents an estimation method for speed and disturbance torque based on observer theory.
  本文根據觀測器理論估測直流馬達的轉速與干擾轉矩.
• The concept of complex torque coefficient was extended to the design of HVDC supplementary controller.
  將復轉矩系數法的概念進行了推廣,并應用到直流附加阻尼控制器的設計中.
• The coefficient of motor torque fluctuation is a technical parameter for describing stationarity of motor running.
  轉矩波動系數是描述電動機運行平穩性的技術指標.
• This torque is a braking torque.
  該轉矩稱為制動轉矩.
• Direct torque control ( DTC ) is a high performance control method.
  直接轉矩控制 ( DTC ) 是一種高性能的控制方法.
• Then the problems such as linkage control and the torque regulation are investigated.
  就磁鏈控制,轉矩估算和轉矩調節幾個問題分別進行了討論.
• However, their cogging torque or unbalanced radial force is usually high, deteriorating the machine performance.
  但是這種電機的齒槽定位轉矩或不對稱徑向力一般也比較高.
返回 torque