support structure

基本解釋

It’s like riding on no support structure at all.
這就像騎著沒有支持結構的車一樣。
So some support structure that's in view for the coming week.
所以在接下來的一周，我們將考慮支撐結構。
Organizations must invest time and effort in creating an appropriate organization and support structure to enable a smooth adoption of SOA principles.
組織必須花費時間和精力創建適當?shù)慕M織和支持結構，從而支持順利地采用 SOA 原則。

In nineteen oh three, a bronze plaque was placed on the inner wall of the statue's support structure or pedestal.
So some support structure that's in view for the coming week.
所以在接下來的一周，我們將考慮支撐結構。
哈佛公開課 - 計算機科學課程節選
So, where is the support structure thus far?
那么迄今為止，最重要的是什么呢？
哈佛公開課 - 計算機科學課程節選

The legal support structure for the terrorist front network in America is emerging.
CENTERFORSECURITYPOLICY: cuffs

decision support system structure 決策支持系統結構
inclined support conversion structure 斜撐轉換結構
support foil structure 箔片支承結構
support overlay structure 支援覆蓋結構英語;[計]支援覆蓋結構;支持覆蓋結構
anode support planar structure 陽極支撐平板

支護結構
Dewatering in the foundation pit will cause groundwater seepage and subsequently influence the water pressure on the support structure.
坑內降水將導致圍繞支護結構滲流的發生,從而影響到作用在支護結構上的土水壓力。
支承
So too large or small cable prestress will exert negative effect on the support structure.
因此，過大或過小的預應力對會支承結構產生不利的影響。
支護機構
A support structure combination of "pile-row + anchoring-grouting" can supply the requirements of design aims in a better way.
“排樁+錨噴”支護機構應用于該類基坑,可較好地滿足設計目標的要求。
交通運輸工程
支護結構

支撐結構
Ultra-thin mirror and its support structure is analyzed by means of FEM. The precision standard for structural model is determined.3.
3、建立結構模型,對帶有支撐結構的超薄反射鏡進行分析,得出在光軸豎直與水平兩種狀態下的PV和RMS值。
航空、航天科學技術
支架
Vibration isolation support structure is the mechanical interface between electronic equipment and transportation equipment. And it is the key component to secure the normal operation of electronic equipment under complex work environment.
隔振支架結構是電子設備與運載工具之間的機械接口,是復雜工作環境下保障電子設備正常工作的關鍵部件。
支撐結構
In this paper,a finite element model of support structure is set upconsidering the membrane characteristic of support structure of space inflatable antenna. ANSYS is used toanalyze the stress distribution of support structure under different load conditions.
本文考慮天線支撐結構的薄壁結構特點,建立了支撐結構的有限元模型。