stepping motor

基本解釋

The stepping-motor control system to geometrically asymmetric sample helps to realize automatic control of stress cutting.
針對幾何非對稱斷裂試件提出的步進電機控制系統有助于實現應力下料的自動控制。
These high-speed switching devices replaced slower less-efficient bipolar transistors add improved the performance of both stepping-motor drives and servo amplifiers.
這些高速開關器件取代慢，少的高效雙極晶體管，增改善的表現，雙方的步進電機驅動器和伺服放大器。
The focus is placed on the controlling of the time interval of the two pulses which are send to stepping-motor drivers and the calculation f the output - number for bits on the I/O card.
文中重點討論了此類軟數控系統中脈沖時間間隔的控制問題以及端口脈沖發送的計算方法和技巧。

步進電機
The system can be applied in many stepping motor control regions.
該系統可應用于多種步進電機控制的場合。
步進電動機
The stepping motor can not be separated from its drive.
步進電動機系統是由步進電動機及其驅動器構成的。
計算機科學技術
步進電機
Every joint is drived by stepping motor.
機器人的各個關節由步進電機作為驅動源。
步進馬達

步進電動機
This thesis elaborates the design of small CNC lathe longitudinal feed system that is composed of stepping motor,reducer,ball-screw pair and carriage etc. This open-loop control system implements the objective positioning accuracy(±0.01 mm).
小型臺式數控車床Z軸進給系統設計,是以步進電動機、減速裝置、滾珠絲杠副組成的開環控制系統,控制定位精度為±0.01 mm。
動力與電氣工程
脈沖電動機
步進電動機
步進電機
步進式電動機