static stiffness

基本解釋

The results showed that the static stiffness from theoretical model is more suitable for small compression deformation.
研究表明，當壓縮量較小時，理論模型對空氣墊靜態剛度的預測較為準確。
On-line automatic testing of bearing static stiffness can be achieved by the new method and testing accuracy and efficiency is increased.
新的測試方法，能夠?qū)崿F(xiàn)軸承靜態剛度的在線自動測試，提高靜剛度的測試精度和效率；
In the static analysis, study mainly focused on the static stiffness and in obtaining the static stiffness distribution of the whole work piece table.
在靜態特性中著重分析了微進給平臺的靜態剛度，得出整個動平臺的工作平面上的剛度分布圖。

靜剛度
Finally, dynamic stiffness prediction method, static stiffness prediction method and stress releasing prediction method are put forward, and at the same time the prediction procedure and its application analysis of the three methods are introduced in actual projects.
提出了動剛度預測法、靜剛度預測法及應力釋放預測法三種預測永存預應力的方法，并介紹了三種方法在工程實際應用中的預測流程以及應用分析。
能源科學技術
靜剛度
This static stiffness model was verified by simulations and experiments. The low frequency characteristics of the dynamic stiffness model accord with the static stiffness model result,while the high frequency characteristics of the dynamic stiffness model agree with frequency response data.
靜剛度模型、動剛度模型低頻特性與靜剛度模型的一致性、動剛度模型的高頻特性均通過仿真和實驗進行了驗證。
機械工程
靜態剛度
In this paper, the bearing capacity, static stiffness of the hydrostatic pressure lead screw nut and associated theoretical calculation formula were analyzed in theory.
本課題在理論上分析了流體靜壓絲杠螺母副的承載能力、靜態剛度和與之相關的理論計算公式。