static calibration

基本解釋

• [計算機科學技術]靜態標定靜態校準
• [機械工程]靜態標定靜態校準
• [動力與電氣工程]靜態校準靜力校準靜校準

英漢例句

雙語例句

• This paper described the consist of the resistance strain measure system and the approach of static calibration in detail.
  詳細介紹了電阻式應變測量系統的組成、系統靜態標定的方法與步驟；
• The data-collection system is developed via VB, VC and assembly language. The static calibration system is developed at one time.
  應用VB、VC、匯編等語言開發了數據采集軟件系統，并設計出了靜態標定系統。
• Finally, principle of the sensor calibration is analyzed, and the sensor coupling matrix is calculated according to the data of the static calibration experiment.
  最后，研究了傳感器的靜態標定原理，并對傳感器進行了靜態標定實驗，得到了傳感器的標定實驗解耦矩陣。

• static calibration更多例句

詞組短語

短語

• Static Flow Calibration 靜態流速校準
• static c calibration 靜校準
• static target calibration 靜態標校
• Static Performance Calibration 靜態標定
• Static Method Calibration 靜態法校準

• static calibration更多詞組

專業釋義

計算機科學技術

• 靜態標定

  The static calibration of the CFBG sensors and the site experiments of WIM system, the acquired data is detailed analyzed.
  4)對稱重系統的靜態標定和現場動態走車實驗,研究其靜態與動態特性。

• 靜態校準

  Has carried on the static calibration to the integrated electron pressure gauge, in the experimental foundation, discussed this design feasibility.
  對一體化電子測壓器進行了靜態校準,在試驗的基礎上,討論了本設計的可行性。

  機械工程

• 靜態標定

  In our country the method of pressure-measuring with copper cylinders adopts the system of static calibration on the whole. The serious static-dynamic discrepancy will be caused when the copper cylinders statically calibrated are used to measure the dynamic chamber pressure.
  我國的銅柱測壓法基本上仍沿用靜態標定體制，而靜標銅柱用于動態膛壓測量會產生嚴重的靜動差。

• 靜態校準

  According to the ISO 230-2 standard to deal with the data, this paper analyzes the CMMs single axis stability and interrelated characteristic among axis under different velocity to realize the dynamic calibration which is more accurate than the static calibration.
  根據ISO 230-2標準處理實驗數據,分析不同速度下測量機單軸穩定性及軸之間的相關性,實現比現行靜態校準方法更精確的動態校準。

  動力與電氣工程

• 靜態校準
• 靜力校準
• 靜校準