sintering
基本解釋
- n. 燒結
- v. 燒結；使熔結（sinter的ing形式）
- adj. 燒結的
英漢例句
- His team at Loughborough University has invented a high-speed sintering system.
在Loughborough大學，他的團隊已經創造了一套快速燒結系統。 - Powder can be spread onto a tray and then solidified in the required pattern with a squirt of a liquid binder or by sintering it with a laser or an electron beam.
將粉末灑向一個托盤，然后用一小盤液體粘合劑把粉狀物按需要的形狀進行固化，或者用激光器或電子束管將其燒結成所需形狀。 - EOS, a German supplier of laser-sintering 3D printers, says they are already being used to make plastic and metal production parts by carmakers, aerospace firms and consumer-products companies.
EOS是一家德國的激光燒結3D印制機生產商。 該公司稱其產品已經被汽車制造者，航空企業和生產消費產品的公司用來制造塑料和金屬部件。 - Additive manufacturing can also be achieved by a number of other methods, such as selective laser sintering (SLS).
FORBES: 3D Printing Doesn't Live Up To The Hype Yet - To be accurate, Lima is using a technique known as Electron Beam Melting (EBM) which is more advanced than your basic laser sintering method.
FORBES: Sintering Your Way To Dental Implants And Hip Replacements
雙語例句
權威例句
詞組短語
- sintering furnace 燒結爐
- sintering of 鑄砂燒貼;燒結料;鑄砂燒掀
- sintering coal 煉焦煤;粘結性煤;焦煤;燒結煤
- microwave sintering 微波燒結
- sintering pallet 燒結機臺車;燒結臺車;加熱使黏結機臺車
短語
英英字典
- a whitish porous incrustation, usually consisting of silica, that is deposited from hot springs
- to form large particles, lumps, or masses from (metal powders or powdery ores) by heating or pressure or both
柯林斯英英字典
專業釋義
- 燒結
Above 1450 ℃,liquid phase sintering became dominant and material shrank intensively.
高于1450℃,液相促進燒結起主導作用,材料大幅度收縮。 - 燒成
The results show the glaze surface has excellent metallic luster effect when the ratio of SiO2/Al2O3 is 10,the amount of nucleation agent is 5wt% and the amount of lead oxide is 40 wt%,and with the suitable sintering system.
實驗結果表明:當SiO2/Al2O3比為10,析晶劑的含量為5wt%,PbO的含量為40wt%時,在合適的燒成制度下,釉面具有良好的金屬光澤效果。 - 易燒性
Reuse of water purification sludge as silica material, with modulus (KH=0.91, IM=1.30, SM=2.37), the effect of the sludge on clinker sintering and properties of the clinker were studied.
1.利用杭州水業集團排放的污泥配料燒制水泥,KH=0.91,IM=1.30,SM=2.37,研究不同摻量對生料易燒性和熟料性能的影響。機械工程
- 燒結
A series of experiments were carried out on Direct Metal Laser Sintering(DMLS) of 316 stainless steel powder.
采用直接金屬激光燒結的方法,對316不銹鋼粉末進行了一系列激光燒結實驗。 - 焙燒
The optimum preparation condition is as follows: reactant concentration is 0.25 ~0.3 mol-L"1, precipitator concentration is 0.2 ~ 0.4 mol-L'1, pH is 8~9, reacting temperature is 60~70癈, sintering temperature is 600癈.
反應適宜的條件為：反應物濃度為0.25～0.3mol·L~(-1)，沉淀劑濃度為0.2～0.4mol·L~(-1)，pH值為8～9，體系溫度為60～70℃，焙燒溫度為600℃。 - 燒結處理
- 燒成
Adding trivalent transition metalions,reducing additives’ particle size and controlling the sintering schedule can significantly reduce the grain size,lower the porosity,increase the number of grain boundaries and enhance the grain boundary barrier,thus effectively improve the potential gradient of ZnO varistor.
采用三價過渡金屬離子摻雜、減小添加劑粉料顆粒粒度以及控制合理的燒成制度,能明顯減小晶粒尺寸,降低氣孔率,增加晶界數目,提高晶界勢壘,從而有效提高ZnO壓敏電阻片的電位梯度。材料科學
- 燒結
- 燒結
- 燒結