rubrene
常見例句
- When the concentration of rubrene is 0.5% ,device CIE is (0.31,0.34),very near the equal energy point of white light.
器件在摻雜濃度為0.;5%25時;色坐標為(0 - Device D: ITO/NPB(45 nm)/NPB:rubrene(5 nm, 1 wt% against NPB)/rubrene/Alq3(10 nm)/rubrene /Alq3(10 nm)/BCP(9 nm)/Alq3(30 nm)/LiF/Al.
器件D: ITO/NPB(50 nm)/Alq3 : DPVBi : DCJTB(10 nm)/Alq3(40 nm)/LiF(1 nm)/Al(200 nm)。 - The structure of the devices are ITO/NPB/TPBi:Rubrene/Alq/Mg:Ag and ITO/NPB/DPVBi:Perylene/Alq:DCJTB/Mg:Ag.
另一種為藍色染料和紅色染料分別加在發光層與電子傳輸層中的普通3層結構器件。 - The mechanism of incomplete energy transfer and directly carriers capture by rubrene was existed in this WOLED simultaneously.
本文對rubrene單摻雜層的有機白光器件的性能和發光機理進行了研究。 - As a result, it’s a crucial issue to get the comprehensive knowledge about the charge transport properties of rubrene thin films.
因此,對紅熒烯薄膜的電荷輸運性質有全面的認識是關鍵所在。 - A fairly pure white OLED with CIE coordinates of (0.33, 0.34) at 4 000 cd/m~2 is realized when the thickness of TBVB is 10 nm and that of rubrene is 0.15 nm.
當TBVB和Rubrene的厚度分別為10;0.;15nm時;器件在亮度為4000cd/m2時發光色坐標為(0 返回 rubrene