residual vibration

基本解釋

IST is adopted to reduce the residual vibration in the flexible manipulator by convolving the desired torque with a sequence of impulses.
IST作為前饋控制技術通過一個序列脈沖和輸入扭矩的卷積來抑制機械臂的殘留振動。
Based on input shaping technology, the residual vibration reduction of little-friction system moved from one rest to another was studied.
基于輸入整形技術，研究小摩擦系統作點到點運動到達指定位置時殘留振動的抑制。
Time delay filter, using delay to attenuate or eliminate the damped exponential sinusoidal signals, is mainly applied to reduce the residual vibration of flexible structures.
時滯濾波器利用時滯來濾除按指數衰減的正弦信號，主要應用于抑制柔性機構的殘留顫抖；

殘留振動
Based on input shaping technology,the residual vibration reduction of little-friction system moved from one rest to another was studied.
基于輸入整形技術,研究小摩擦系統作點到點運動到達指定位置時殘留振動的抑制。
殘余振動
Lots of simulating experiments indicate that, the control system for flexible and redundant manipulators with FN7NC and WNNC is feasible, the precision of fixing position of target and reducing the residual vibration is contentment.
大量的仿真實驗結果表明，本文所設計的分別用FNNC進行位置控制、用WNNC進行柔性臂殘余振動抑制的柔性冗余度機器人控制系統是可行的，軌跡跟蹤精度以及殘余振動抑制的效果也是令人滿意的。
電子、通信與自動控制技術
殘留振蕩
Input shaping technique suppresses residual vibration through a open-looped input modulate method, therefore used widely in the high-accuracy fast navigation systems.
輸入整形技術通過一種開環輸入調制方法來抑制系統的殘留振蕩，因而在高精度快速定位系統中得到了廣泛應用。
經濟學
剩余振動