optical receiver

基本解釋

The method of AC-coupling avoids the technical problems in the process of designing a DC-coupling burst-mode optical receiver.
交流耦合方法避開了直流耦合突發式光接收模塊設計過程中的技術難題。
Concern on low power optical receiving, as well as the definition and evaluation for "low power optical receiver" are discussed in this article.
提出討論低光功率接收問題應注意的事項以及“低光功率接收機”、“低光功率接收適用機”的定義和評判方法方案；
Hence, this thesis proposes a novel fully differential optical receiver with advantages of a doubled sensitivity and a much better bandwidth compared with a present differential optical receiver.
因此，本論文提出了一種全差分光接收機，其優點是可使現行差分光接收機的靈敏度倍增和帶寬明顯提高。

光接收機
If no measures are taken, the serious basic-line-shift as well as the loss of chip clock and the difficulty of the data recovery will be introduced in the optical receiver, which causes the communication to go along abnormally.
如果不采取任何措施，會給光接收機帶來嚴重的基線漂移，同時會引起碼時鐘丟失和碼元恢復困難等一系列問題，導致通信無法正常進行。
光接收器
光學接收器
高速光接收模塊

光接收機
In this paper the complete noise equivalent circuit models for PIN and HEMT devices are presented. The accurate analysis and calculation for 2.5Gb/s PIN-HEMT optical receiver noise and sensitivity are made.
本文給出了完整的PIN和HEMT器件噪聲等效電路模型，對2．5Gb／sPIN-HEMT光接收機噪聲和靈敏度進行了精確的分析計算，并討論了低頻閃爍噪聲對靈敏度退化的影響，光接收機噪聲實測結果與模擬分析結果數據符合很好。
光接收器
光學接收器