metallurgical bonding

基本解釋

• 冶金結合

英漢例句

雙語例句

• The metallurgical bonding was achieved by combining effect of diffusion and local melting when the explosive parameters were selected correctly.
  當爆炸參數選擇正確時，可通過擴散和局部熔化的共同效應而達到冶金結合。
• The results show that the bonding way between elements is metallurgical bonding and the alloying rate rises with the increase of sintering temperature.
  結果表明， 在不同燒結溫度下，燒結體中各元素之間產生冶金結合， 且合金化程度隨溫度的升高而增大。
  rjggy.net
• The relatively high temperature achieved the melting point of particle material at the localized contact zone may promote the formation of the metallurgical bonding in the coating.
  高達粒子材料熔點的界面溫度與有效接觸面積的顯著增加，將有助于粒子與基體之間冶金結合的形成。

• metallurgical bonding更多例句

詞組短語

短語

• metallurgical bonding interface 冶金結合層
• causes metallurgical bonding 牢固的冶金結合
• powder metallurgical bonding 粉末冶金復合
• chemical and metallurgical bonding 化學結合

• metallurgical bonding更多詞組

專業釋義

能源科學技術

• 冶金結合

  Laser cladding is used to form a kind of surface coating, which has a good metallurgical bonding with the substrate, without gas holes and crack, by using a high energy laser beam to melt coating material and a thin layer base metal. It has been becoming one of new techniques that have infinite development future and characteristic very much in the modern surface technique system, and bigger application foreground in "remanufacturing engineering in the 21st century".
  激光熔覆是利用高能量激光束熔化涂層材料和一薄層基體，形成一個無氣孔、無裂紋并能和基體形成良好冶金結合的表面涂層，它已成為現代表面技術體系中的極具發展前途和頗具特色的新技術之一，并在“21世紀的再制造工程”中有著廣闊的應用前景。