interpassivity

常見例句

• The converter has three beds of catalyst with interpass heat exchangers.Cooling medium is feed gas.
  該轉化器催化劑床層被分為3層，層間配置換熱器，冷卻介質是原料氣體。
• The upper limit of the qualification is the highest interpass temperature reached in the welding procedure test.
  合格鑒定的上限為焊接工藝試驗時達到的最高層間溫度。
• What is the required minimum preheat and interpass temperature for 1 in. thick API 5L grade B steel welded with flux cored arc welding ?
  (對于用藥芯電弧焊接厚度為1in的API 5L, B級鋼的最小預熱及層間溫度是多少？
• Cold lap is a condition where the weld filler metal does not properly fuse with the base metal or the previous weld pass material (interpass cold lap).
  冷隔？（未熔合）由于熔敷金屬?zèng)]有很好的與母材熔合或沒與前道焊縫熔合（層間未熔合）。
• In welding process, the over range of the interpass temperature can be avoided by the control of heat treatment equipment and by the check of the far-infrared temperature instrument.
  并指出焊接過程中層間溫度的控制,在用熱處理控制柜自動控制的同時,再采用便攜式遠紅外測溫儀對層間溫度進行校核,可以避免層間溫度超標現象。
• The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness.
  需要適當?shù)某涕g溫度和正確選擇填充金屬材料來防止冷熱裂縫，產生適當?shù)娜渥冏枇晚g性。
返回 interpassivity