flexural strength

基本解釋

• 撓曲強度

英漢例句

雙語例句

• The relationship between nucleation temperature and flexural strength was investigated.
  探討了核化溫度與抗彎強度之間的關系。
• The growth of fibre content raises the values of flexural strength and flexural modulus, but has no contribution on shear strength.
  短炭纖維含量的增加，使復合材料的彎曲強度和彎曲模量隨之增大，但對剪切強度沒有貢獻。
• Objective: To compare two sorts of mental net reinforcement on the flexural strength of denture base resins to provide some data for the clinical application.
  目的：檢測兩種金屬網對義齒基托材料抗折強度的加強作用，為義齒基托修復的臨床選擇提供理論依據。

• flexural strength更多例句

詞組短語

短語

• flexural impact strength 撓沖試驗強度;撓曲沖擊強度
• flexural tensile strength 彎曲抗拉強度
• flexural compressive strength 彎曲抗壓強度
• flexural fatigue strength detail 撓曲疲勞強度
• Flexural yield strength 曲降伏強;彎曲強度;彎曲屈服強度

• flexural strength更多詞組

專業釋義

土木建筑工程

• 抗折強度
• 受彎承載力

  The ultimate flexural strength of SRC beam calculated by using this method is averagely 26 percent smaller than that of test.
  應用該方法計算所得梁的受彎承載力比試驗值平均小26%。

• 抗撓強度

化學

• 彎曲強度

  The gel time was 1.7h and the flexural strength and the compression strength could reach 74.6MPa and 58.2MPa respectively.
  凝膠時間為1.7h,彎曲強度可達74.6MPa,壓縮強度可達58.2MPa。

• 抗彎強度

  The maximum values of the fracture toughness and the flexural strength can be obtained when the amount of WC particles is 4wt. % and 8wt.
  適量WC顆粒的添加可以提高納米Si3N4陶瓷的斷裂韌性和抗彎強度，其最大值分別在WC添加量為4wt.％和8wt.％時獲得。

• 抗折強度

機械工程

• 彎曲強度

  The results of the mechanical property measurement showed that CaSO4 whisker could improve tensile strength and flexural strength of PP KPDM blend simultaneously. and that the composites with good rigidity and impact could he gotten hy controlling components.
  力學性能測試結果表明,硫酸鈣晶須可提高PP/EPDM基體的拉伸強度和彎曲強度,且通過控制各組分配比可制得韌性和剛度均衡的復合材料。