filler wall

基本解釋

The filler wall makes vertical stiffness well-distributed, which causes a failure pattern transformation from frame type to reinforced concrete shears …
填充墻的存在使得該體系的豎向剛度分布較為均勻，其變形和破壞形態有從框架型向剪力墻型轉化的趨勢；
Combined with practical works of coal-breaker house in one power plant the production of cracks on filler wall is analyzed, which probably caused by dynamic load.
結合某電廠碎煤機樓的工程實際情況，對在動力荷載作用下可能引起填充墻體裂縫的原因進行了分析，并通過方案比選提出了該實際工程裂縫的處理措施。
Short-limb shear walls are widely used in mid-high buildings. The displacement of this kind of the structure is always exaggerated, due to the neglect of the stiffness of the masonry filler wall.
短肢剪力墻結構形式被廣泛運用在中高層住宅建筑中，目前其結構分析方法由于忽略了砌體填充墻剛度而使得計算所得的結構位移往往偏大。

填充墻
Filler wall stiffness of the structure makes the existence of the natural cycle decreases, so that role and the level of the building on the increasing role of the earthquake.
4.填充墻剛度效應的存在使得結構自振周期減小,從而使作用與整個建筑上的水平地震作用增大。