excitation source

基本解釋

OBJECTIVE: To extract the heart excitation source signals in human pulse wave.
目的：提取心臟激勵源信號的特征波形。
The system is composed of rotate drive and control unit, data acquisition unit, program control load, initial excitation source and measure-control program.
本文設計的發電機檢測系統由轉速驅動和控制單元，數據采集單元，可程控的負載，初始勵磁電源以及應用測試軟件組成。
In this paper, a dynamic calibration method using a finite duration impulse excitation source is presented, which can be used to calibrate the frequency response of high-pressure transducers(HPT).
本文提出了用任意時限脈沖作激勵源的一種動態校準方法，用于校準動壓傳感器的頻響特性。

激勵源
The prototype experiments for cogging torque and torque ripple are carried out. Furthermore, vibration of the in-wheel motor is an important excitation source which results in the vibration of powertrain and vehicle’s interior noise.
輪轂電機的振動是引起動力系統總成振動并造成車內噪聲的重要激勵源。
勵磁電源
According to each kind of motor experiment characteristic, proposed that two kind of control mode - - convention load and the T-n survey, choose the TL494 special-purpose chip control the cocurrent excitation source's project design.
根據各種電機實驗特性的需要,提出兩種加載控制方式——常規負載和T-n測繪、選擇TL494專用芯片控制的直流勵磁電源的方案設計。
機械工程
激勵源
Direct Digital Synthesis (DDS) technology was used in the design of the excitation source.
采用直接數字頻率合成(DDS)技術設計的激勵源,能產生頻率幅值穩定、波形良好的激勵信號,頻率分辨率可達微赫茲級。
激磁源