compression test

基本解釋

The deforming process in metal forging is simulated through the compression test in which several workblanks of different size are tested on the tools with different surface roughness.
文章通過幾個不同尺寸坯料在不同表面粗糙度的工具上進行的壓縮試驗，模擬金屬鍛造的變形過程；
The conductive coat has been applied on concrete test blocks during the compression test, the data shows that the conductive coat is rather sensitive to formation and extension of tiny cracks.
將導電涂膜應用于混凝土試塊的抗壓試驗，結果發現導電涂膜在快速加、卸載條件下對混凝土微裂縫的出現及擴展相當敏感。
At present, four methods are mainly used for reinforcement earth research: prototype test, model test, three-axial compression test, direct shear test and drawing test.
目前加筋土的試驗研究主要有四種方法：原型試驗、模型試驗、三軸壓縮試驗、直剪試驗和拉拔試驗。

The report goes on to state that Iran went beyond such theoretical studies and built a large containment vessel at its Parchin military base, starting in 2000, to test the feasibility of such explosive compression.
ECONOMIST: Israel squares up to Iran

壓縮試驗
Finally, we simulate the uniaxial compression test of the asphalt mortar applied by numerical model established by the PFC, and research the influence of microscopic parameters to the virtual experiment results.
最后,利用離散元理論所建立起來的PFC數值模型進行瀝青砂漿單軸壓縮試驗?zāi)M,并研究了模擬中的細觀參數的選取對虛擬試驗結果的影響。
能源科學技術
壓縮試驗
The effects of interval time on the structur e and properties of7075 aluminum alloy during the two-stage hot compression de formation were investigated by isothermal compression test at gleeble-1500 ther mal-mechanical simulator.
在Gleeble-1500熱模擬試驗機上，采用高溫等溫壓縮試驗，研究了7075鋁合金兩道次熱壓縮變形道次間隔時間對合金組織和性能的影響。
壓縮實驗