carbide slag

基本解釋

Design and application of carbide slag in propylene oxide production were summarized.
總結了電石渣生產環氧丙烷工藝中的設計與應用。
Under the above test condition the treated wastewater is disposed of by carbide slag that can react with iron ion by flocculation and remove rate of CF and CT in wastewater can reach 60% to 95%.
在上述實驗條件下，對還原處理的廢水用電石渣進一步處理，使得廢水中的鐵離子產生絮凝作用，最終廢水中氯仿和四氯化碳的去除率可達到60～95%。
The influence on propylene epoxide by lots of mechanical admixture and chemical admixture in carbide slag, and the instability factors in production control were introduced.
介紹了電石渣中的大量機械雜質和化學雜質對環氧丙烷生產的影響及由其所引起的生產控制方面的不穩定因素。

電石渣
Alkaline slurry and salt slurry exacerbated sinter of white clay and carbide slag,there into alkaline slurry is more obviously,which make desulfurization result of white clay and carbide slag reduction.
堿渣和鹽泥加劇白泥和電石渣的燒結,其中堿渣尤為明顯,使白泥和電石渣的脫硫效果降低。
化學
電石渣