burst pressure

基本解釋

The main research results are as follows:(1)Based on strength equivalent method, short-time burst pressure formula of PSP was deduced.
采用力平衡法推導出了這種復合管的短期爆破壓力計算公式。
In order to make the calculated burst pressure coincide with actual value, the developed fiber strength value must be determined by the simulation test.
為了使計算的爆破壓強與實際結果相符合，纖維發揮強度的選取必須由模擬試驗確定。
As shown in the experimental results, its short-time burst pressure at room temperature is increased by 129%, ring stiffness by 19%, and critical buckling pressure by 57% in comparison with PE pipe.
結果表明，與相同規格尺寸的PE管相比，其短期爆破壓力、環剛度和臨界失穩壓力分別提高了129%、19%和57%；

Does this mean a burst is on the cards, or does it suggest selling pressure (both short and closing longs) may exert an influence at a more gradual pace?
FORBES: It Started With Tulips, Now Bubble-Watchers Are Looking To The Bond Market

爆破壓力
The pipes exhibited 4-fold improvement of hoop tensile strength and 70% increase of burst pressure . The formation of fibril structure along hoop direction and elimination of weld-lines resulted in the high hoop strength of the pipes.
爭下實現管材的自增強，自增強管材的周向強度提高了4倍，爆破壓力提高了70％，管材強度提高的原因是管材中形成了微纖結構；采用芯棒旋轉口模擠出管材，可改變?nèi)劢雍鄣慕Y(jié)構，在合適的擠出速度和芯棒轉速下，甚至可消除熔接痕。
機械工程
爆破壓力