bending
基本解釋
- n.彎曲度(偏移;透鏡的配曲調整)
- v.彎曲
同根派生
- 同根詞
- 詞根:bend adj.
- bended彎曲的 n.
- bend彎曲
- bender飲酒作樂;扭彎物體的人;六便士銀幣 v.
- bended彎曲;使屈從;決意(bend的過去分詞形式之一) vi.
- bend彎曲,轉彎;屈服;傾向;專心于 vt.
- bend使彎曲;使屈服;使致力;使朝向
英漢例句
- The trees were bending before the storm.
在暴風雨的威力下樹被吹彎了。 - The branches were bending down with the weight of the apples.; The apples weighed the branches down.
蘋果把樹枝墜得彎彎的。
《新英漢大辭典》 - We can not only render things invisible in theory by bending light waves around an object, but have even progressed so far as to be developing the metamaterials needed to bring the theory to life.
我們不僅能通過彎曲物體周圍的光波而使其達到理論隱形的標準,而且已經發明出能夠使這一理論在日常生活中得以應用的材料。 - In "Rodeo -- New York City" Robert Frank pictures a thin cowboy bending his head to light his cigarette.
- This is a poem about bending and breaking, forms, the material givens of the world.
這是個關于曲折和中斷的詩,形式,這個世界給我們的原料。
耶魯公開課 - 現代詩歌課程節選 - By combining larger-than-life sets and a mind-bending plot, Nolan creates an intelligent, highly entertaining and dramatic film.
- By that time, Benevento had amassed a small army of keyboards, circuit-bending toys and piano effects.
NPR: Marco Benevento: Jazz Not Jazz
雙語例句
原聲例句
權威例句
詞組短語
- bending vibration 彎曲振動
- progressive bending 連續彎曲加工;連續彎曲;連盡直開減工;邊緣彎曲法
- bending radius 彎曲半徑;轉彎半徑
- lateral bending 橫向彎曲;側向彎曲;[木]側彎;橫彎
- to bending 折彎;開直
短語
英英字典
- When you bend, you move the top part of your body downward and forward. Plants and trees also bend.
- When you bend your head, you move your head forward and downward.
- When you bend a part of your body such as your arm or leg, or when it bends, you change its position so that it is no longer straight.
- bent
- If you bend something that is flat or straight, you use force to make it curved or to put an angle in it. ...
- bent
- When a road, beam of light, or other long thin thing bends, or when something bends it, it changes direction to form a curve or angle.
- A bend in a road, pipe, or other long thin object is a curve or angle in it.
- If you bend rules or laws, you interpret them in a way that allows you to do something they would not normally allow you to do.
- If deep-sea divers suffer from the bends, they experience severe pain and difficulty in breathing as a result of coming to the surface of the ocean too quickly.
- an ordinary consisting of a diagonal line traversing a shield
- &rarrsee also bent
柯林斯英英字典
專業釋義
- 彎曲
The toppling in the metamorphic areas is divided into brittle fracture and ductile bending.
現將變質巖地區反傾向?qū)訝罱Y(jié)構邊坡的傾倒變形進一步劃分為脆性折斷傾倒、延性彎曲傾倒兩種類型。 - 抗彎
High-rise structure is a kind of structures whose height-to-width ratio is quite large with comparatively flexible bending stiffness.
高聳結構是一種高寬比較大,結構抗彎剛度相對較柔的構筑物。 - 受彎
Comparing with the beams before fire,the bending and shear properties of ceramsite concrete beams after fire all reduced in different degrees.
與火災前相同陶?;炷梁推胀ɑ炷翗?gòu)件進行對比,過火后試件的正截面受彎和斜截面受剪承載力均有不同程度的降低。 - 屈曲
The local buckling of aluminum members subjected to bending was analyzed using finite element analysis of the beam web stability under shear.
針對鋁合金梁中可能出現的腹板剪切屈曲,通過有限元方法研究了鋁合金受剪板件的穩定性。能源科學技術
- 彎曲
The dynamic simulation just considers the side bending which is 2-D bending.
動態分析只考慮型鋼的旁彎,即二維彎曲狀態。 - 三維曲面
Flexible bending forming is a new technology to achieve the sheet flexible bending for 3-D surface, It’s the organically combine with multi-point forming and the traditional bending forming technology.
柔性卷板成形是一種實現板材三維曲面柔性成形的新技術,是多點成形與傳統卷板成形技術的有機結合。交通運輸工程
- (木船)腰部外板,舷側厚板;舢板舷緣板
- 系,縛(帆或繩索等):
- 綁結,繩結
- 彎曲
- 氮麻醉
- (潛水員患的)減壓病,潛函病
- 壓彎
- 撓曲
- 扭彎
- 拉枝
Especially, experimentations were carried on bending and topping, harvest and reposition, and so on.
尤其在拉枝摘心、采收貯藏等方面進行了試驗研究。數學
- 曲化
The thesis take the tree for example, presents different initial set by different bending. The method concludes control-point spline, data-point spline and subdivision.
文中以樹木的模擬為例,給出了在外輪廓曲化時使用不同的曲化方法所得到的初始集,其中包括控制點樣條、型值點樣條和細分方法,并給出了利用這些初始集迭代若干次的效果圖。機械工程
- 折彎
- 彎曲
- 彎曲
- 轉折
- 回折
- 彎曲