bellows-type

常見例句

• Pressure gauges shall generally be bourdon tube or bellows type.
  現場壓力表應通常是波登管或波紋管型。
• Only valves such as packless diaphragm or bellows type should be used.
  只能使用無襯墊膈膜閥或波紋管閥。
• The key factors affecting the stagnation point position of L-type pipeline section are the setting position of bellows type expansion joint and the bend angle degree.
  影響水平轉角管段駐點位置的主要因素為波紋管補償器設置位置、彎頭角度。
• Pilot operated valves shall be considered for back pressures greater than 40% of set pressure if more favourable de-rating factors result in a valve smaller than a bellows type.
  如果更多有利的非測定因子導致閥門小于波紋管類型的，對于背壓大于設定壓力的40%25的，應考慮輔助操作閥。
• Shaft sealing adopts single (double) face, bellow type mechanical seal, it also can adopt soft packing, is can meet sealing demands of all kinds of conditions.
  軸封采用單（雙）端面、波紋管等形式的機械密封，也可采用軟填料密封，能適應各種條件下的密封要求；
• The calculation of stagnation point position of straight pipeline section with both movable ends and L-type pipeline section with bend at one end and bellows type expansion joint at other end is discussed.
  摘要探討了兩側為活動端的直管段及一側活動端為彎頭，而另一側活動端為波紋管補償器的水平轉角管段駐點位置的計算。
返回 bellows-type