armored cable

基本解釋

Among them, transformer circuit uses x 3-core armored cable with 10kV cross-section 185mm2, motor circuit uses three-core armored cable with 10kV cross-section 95mm2.
其中，變壓器回路采用10kV截面為185mm2的三芯鎧裝電纜，馬達回路采用10kV截面為95mm2的三芯鎧裝電纜。
Applicable to all types of wire clamp and fixed ribbon weaving, or armored cable, for the need for cables and the core wire part of the flameproof enclosure up to IP66 sealing gas place.
適用于夾持和固定各種類型的鋼絲編織或帶狀鎧裝電纜，用于必須對電纜芯線部分隔爆及外殼氣體密封達IP66的場所。
The single core armored cable in the list are only suitable for use for DC circuit. If used for AC circuit, non-magnetic material or armored by reducing magnetic loss structure must be used.
表中單芯鎧裝電纜僅適用于直流線路，如用于交流則必需采用非磁性材料或減少磁損耗結構的鎧裝。