Toolpaths

基本解釋

In addition, the tool can be stepped back and forth along the toolpath.
而且刀具還可以沿著刀具路徑一步步的向前或向后仿真。）
Then research how to set parameter under the CAM module of UG NX2 to generate toolpath and cutter source file of the shaft part.
并且研究了如何在UG NX2的CAM模塊下進行設置,生成軸類零件的加工軌跡和刀位源文件。
DUCTpost prior to DP1335 will not support circular G2/G3 arc leads output for angular toolpaths offset in the XY, YZ or ZX planes greater than 0.1 degrees.
在1335以前的舊版本如果刀路延XY;YZ和ZX平面偏置角度大于0.;1度的情況下是不可以輸出圓弧連接的。
The purposes of part machining modeling in automatic programming is to provide the geomet ry basis for toolpath generation.
自動編程中零件加工造型的目的,是為了給刀具軌跡提供幾何依據(jù);
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成nc銑加工刀具的運動軌跡時，應注意優(yōu)化加工路徑，以減少加工誤差、少加工成本。