lens distortion

基本解釋

Reset: Clicking this button will reset the lens distortion model to its default state.
復位：點擊該按鈕將重置鏡頭畸變模型到默認狀態。
Shows lens distortion workflow based on re-distorting and compositing with the original image .
顯示鏡頭失真的基礎 上重新扭曲和合成與原始圖像的工作流。
Because of zero distortion at the centre of image, parameter calibration and lens distortion correction of CCD camera and DLP projector is separated with the points in center and all the rest points.
該方法根據圖像中心附近點畸變量較小的性質，利用中心附近點和全場視點對CCD相機和DLP投影儀的內外部參數標定和鏡頭畸變修正進行分離。

However, these feelings never lasted long, because the shot would switch to another camera position which had worse contrast, or greater lens distortion, or shallower depth of field, and the illusion would be broken.
ENGADGET: BBC shows off 33-megapixel Super Hi-Vision Olympic footage, we ask: why?
Furthermore, we have achieved a wide horizontal viewing angle of 45 degrees by incorporating an optical lens that thoroughly suppresses unwanted elements such as aberration and distortion.
ENGADGET: Sony's head-mounted 3D visor is real, HMZ-T1 arrives in Japan November 11th
Offering exceptional optical performance to provide minimal distortion and chromatic aberrations while suppressing ghosting and flare, the advanced lens unit allows for higher shutter speed and captures stunningly clear images.
ENGADGET: Panasonic's Lumix line gets a lot more crowded

鏡頭畸變
It is very important to correct the camera lens distortion fo. getting the precise image and locating the correct po- sition of the object in robot vision detection and auto selection.
在機器人視覺檢測及自動化分撿中,準確地校正攝像機鏡頭畸變對獲取物體精確圖像及確定物體準確位置具有重要意義。
鏡頭失真

鏡頭畸變
Calibration method is crucial for the results of 3D vision measurement system. Therefore, this thesis introduces an effective calibration method, which takes lens distortion into account, to meet the need of high-accuracy 3D measurement.
在三維視覺測量中,標定方法對測量結果的影響是決定性的,本文通過分析、比較各種視覺模型及標定方法,采用考慮鏡頭畸變因素的三維視覺模型以滿足高精度測量系統的需求,并采用兩步法實現攝像機參數標定過程。
透鏡畸變